Cordless Spray Gun

1, Prepare the surface: For an interior wall, first remove any wall hangings and cover the floor and furniture with drop cloths. Clean the wall to remove dust and dirt. If it's an outdoor fence, clear away any debris and scrub off any mold or mildew.

2, Fill the sprayer: Pour your chosen paint into the sprayer's reservoir. Use the viscosity measuring cup to check the paint's consistency. If it's too thick, you may need to thin it according to the paint manufacturer's instructions.

3, Adjust the settings: Set the spraying pressure and flow rate based on the type of paint and the surface you're painting. For a smooth interior wall, a lower pressure and flow might be suitable, while a higher setting could be used for a rough outdoor fence.

4, Test the spray: Before starting on the actual surface, test the spray on a scrap piece of material. Adjust the settings further if needed to achieve an even and consistent spray pattern.

5, Begin painting: Hold the sprayer at a consistent distance from the surface, usually around 10 - 12 inches for most applications. Move it in a steady, sweeping motion, overlapping each pass slightly to ensure full coverage.

1, Empty the reservoir: After finishing your painting project, remove any remaining paint from the sprayer's reservoir. You can pour it back into its original container if it's still usable.

2, Rinse with water: Fill the reservoir with clean water and run the sprayer until the water runs clear. This helps to flush out any remaining paint.

3, Use the cleaning needle: If there are any stubborn clogs in the nozzle, use the included nozzle cleaning needle to gently remove them. Be careful not to damage the nozzle.

4, Dry thoroughly: Allow the sprayer to air dry completely in a well - ventilated area. This prevents any moisture from causing rust or damage to the internal components.

The INGCO Cordless Spray Gun CSGLI2001 is an excellent choice for interior walls. Its adjustable pressure and flow settings allow you to achieve a fine, even finish on walls. The cordless design gives you the freedom to move around the room easily, reaching all corners and edges without the hassle of cords. Additionally, its lightweight construction makes it comfortable to use for extended periods, which is essential when painting large wall areas.

1, Sand the surface: Start by lightly sanding the furniture to create a smooth base for the paint. This helps the paint adhere better and gives a more professional - looking finish.

2, Apply primer: If the furniture is made of a porous material or if you're changing the color significantly, apply a primer. Let it dry completely according to the manufacturer's instructions.

3, Adjust the sprayer: Set the spraying pressure and flow rate to a lower setting. This will give you more control and result in a finer finish, which is important for furniture.

4, Paint in layers: Apply thin, even coats of paint. Allow each layer to dry completely before applying the next one. This prevents drips and ensures a smooth, durable finish.

5, Finish with a sealant: Once the paint is dry, apply a clear sealant to protect the finish and give the furniture a polished look.